UREI by Soundcraft

UREI 1605 TECHNICAL SUMMARY

CHANNEL INPUTS
Mic inputs are on balanced XLR connectors, while RIAA and Line inputs are provided on unbalanced RCA phono connectors. A ¼" TRS Insert jack is provided in the Mic path of Channel 1 to allow connection of external processing.

BOOTH OUTPUT
The Booth output is provided on both balanced XLR and unbalanced RCA phono connectors, and is controlled by the master Booth level control. A 'Mic Defeat' switch mutes the signal from the mic to the booth output to avoid feedback.

MASTER OUTPUT
The Master output is provided on both balanced XLR and unbalanced RCA phono connectors, and is controlled by the Master level control. A separate ¼" jack feeds a balanced mono sum of the master output signal.

Aux/FX LOOP
The send-and-return Aux/FX loop is supplied on unbalanced RCA phono connectors, and works in conjunction with the top panel Aux/FX level and routing controls.

PHONES SECTION
The front panel illuminated headphone output is supplied on both 1/4" jack and 3.5mm mini-jack connectors for total flexibility.

EXTERNAL MUTE FUNCTION
This contact port will mute all music channels except Mic input 1, to allow PA announcements. Useful for fire alarm systems.

POWER SUPPLY
The high quality internal PSU is fed via an IEC mains inlet, allowing a detachable mains cable to be used. A cable retaining clip provides total cable security. Universal power supply 100V - 240V AC. Consumption 50W max.

UREI 1605 TECHNICAL SPECIFICATIONS:

INPUT AND OUTPUT LEVELS
CD/Line	20Hz-20kHz (+/-0.5dB)
Phono	20Hz-20kHz (+/-1.5dB/RIAA)
Mic [Line]	20Hz-20kHz (+/-2dB) [20Hz-20kHz (+/-0.5dB)]
Aux/FX Return	20Hz-20kHz (+/-0.5dB)
INSERT SEND (unbalanced, Ch1 only)
CD/Line	90dB
Phono	75dB
Mic [Line]	70dB [90dB]
Aux/FX Return	90dB
INSERT RETURN (unbalanced, Ch1 only)
THD	<0.02%
Crosstalk	80dB
PHONO/LINE INPUT (unbalanced)
CD/Line	-12dBu/22kΩ
Phono	-52dBu/47kΩ
Mic [Line]	-52dBu/3k Ω [-12dBu/22kΩ]
Aux/FX Return	-12dBu/22kΩ
REAR PANEL CONNECTOR CONNECTIONS
XLR INPUT & OUTPUT (3 pin female XLR)
Pin 1 Ground Pin 2 Signal Hot Pin 3 Signal Cold
INSERT SEND and RETURN (1/4" TSR Jack) MIC 1 & 2 Only
Tip Send Ring Return Sleeve Ground
PHONO and ¼" JACKS
Tip Hot Sleeve Screen
HIGH PASS FILTER
18dB/Octave @ 63Hz
MASTER/BOOTH OUTPUT
Output Impedance	75Ω
Recommended Load	600Ω or greater
Frequency Response	+/- 1dB, 20Hz-20kHz
Distortion	< 0.05% THD, 20Hz-20kHz @ +16dbu
Maximum Output	+20dB into 600Ω
HEADPHONE OUTPUT
Output Impedance	<40Ω
Recommended Load	150Ω or greater
Frequency Response	+0, -1dB, 20Hz-20kHz into 200Ω load
Distortion	< 0.05% THD, 20Hz-20kHz @ +16dBu
Maximum Output	190mW into 150Ω
MONO OUTPUT
Output Impedance	75Ω
Recommended Load	2kΩ or greater
Frequency Response	+/- 1dB, 20Hz-20kHz
Distortion	< 0.05% THD, 20Hz-20kHz @ +16dBu
Maximum Output	+20dBu into 2kΩ
EFFECTS LOOP OUTPUT
Output Impedance	~75Ω
Recommended Load	5kΩ or greater
Frequency Response	+/- 1dB, 20Hz-20kHz
Distortion	< 0.05% THD, 20Hz-20kHz @ +16dBu
Maximum Output	+20dB into 2kΩ
NOISE
All channels routed at unity, mix at unity	< -85dB
Crosstalk (@1kHz)	< -85dB
CHANNEL MUTE
Fader Cut-off (rel. 0 Mark)	< -95dB
FX Sends offness	< -90dB
INPUT AND OUTPUT IMPEDANCE
Mic Input	2kΩ
Line Input	45kΩ
Aux Input (Unbalanced RCA Phono)	30kΩ
Master/booth Output	75Ω
Aux Output	75Ω
Headphones Output	40Ω
MAXIMUM OUTPUT LEVELS
Insert Send Output	+20dBu into 2kΩ
Mix Output	+20dBu into 600Ω
Aux Output	+20dBu into 2k
Booth Output	+20dBu into 600Ω
Headphones Output	+20dBu into 300Ω
Headphones	190mW into 150Ω
DIMENSIONS/ WEIGHT
Without rack ears 87.6(H) x 440(W) x 400(D) (mm) With rack ears 87.6(H) x 483(W) x 400(D) (mm) Weight 8.7kgs/ 19.1 lbs

DJ MIXERS

1603

1605

Discontinued

UREI Feature Guide

UREI Reviews